HeavisideGate APM-2K

Solid-state vacuum-potential power booster — Heaviside component extraction

$650 plan

Get build plan →

// Blueprint rendering available after purchase

Technical Specifications

Classification Scalar EM — Energy

Topology Solid-state ferrite cavity + MOSFET switching network

BOM Cost $1,820

Build Time 5 hours

Input 12–48V DC, adjustable

Mechanism Heaviside component extraction

Difficulty 3 / 5

Est. Build Cost $1,820

Est. Build Time 5 hours

Overview

The HeavisideGate APM-2K is a solid-state power booster designed around Oliver Heaviside's original formulation of EM energy flow — which includes a component orthogonal to the Poynting vector that classical circuit theory discards. The APM-2K uses a precision-wound ferrite cavity tuned to the vacuum-potential resonance frequency of the input supply, combined with a high-speed MOSFET switching network that samples the reactive (Heaviside) energy component before it returns to the source. The result is an apparent power amplification effect attributed to coupling into the structured vacuum potential. This 10-page build manual includes complete BOM ($1,820 total), step-by-step assembly in 5 build hours, detailed schematics, troubleshooting procedures, and calibration protocols using a precision power analyzer.

Intended Research Use

Heaviside energy flow extraction, vacuum-potential coupling experiments, over-unity solid-state topology research, reactive power recapture studies.

Bill of Materials (15 components)

#Component

01 Precision ferrite toroid core, mix 77, 80mm OD (×2)

02 24 AWG magnet wire, 200m spool

03 IRFP260N power MOSFET (×4)

04 IR2110 gate driver IC (×2)

05 Ferrite bead suppressor array (×10)

06 100μH power inductor, 5A (×4)

07 470μF electrolytic capacitors, 100V (×6)

08 MBR2060CT Schottky rectifier (×4)

09 Precision power analyzer (Yokogawa WT310 or equiv.)

10 DDS signal generator module (0–5 MHz)

11 Custom PCB (Gerber files included)

12 Hammond 1590D aluminum enclosure

13 48V DC bench power supply, 10A

14 Oscilloscope, 2ch, 200MHz

15 Thermal paste + heatsink (60×60mm)

Get Build Plan

Complete plan PDF including all specs, winding geometry, drive circuit schematics, measurement protocols, and Gerber files where applicable.

$650 one-time

Purchase plan — Stripe

Also available: Component kit $4,500 — members get 10% off

Save 10% with Membership

Complete build documentation (PDF)

Winding specs + circuit schematics

Measurement + verification protocols

Sourcing guide for all BOM items

Lifetime access, no subscription

Build Difficulty

Intermediate — requires basic RF electronics experience.

Est. cost: $1,820
Est. time: 5 hours